Instructions for use

Our application instructions are an important support to ensure that our labels are applied correctly and are long-lasting. From surface preparation to washing, we provide our customers with all the important information to ensure the best possible durability and functionality of our products.

Clothing stickers

  • Surface must be smooth, clean and free of grease
  • Sticker on laundry label or manufacturer's label
  • Smooth out to remove air bubbles
  • Do not wash for at least 24 hours after applying the sticker.
  • Waterproof, recommended for wash cycles up to 40 degrees Celsius.

Universal stickers/dots

  • Surface must be smooth, clean and free of grease.
  • Smooth out to remove air bubbles.
  • After application, wait at least 24 hours before first use.
  • For dots, motif stickers and stickers for self-labelling: to avoid heavy abrasion, stick one of the transparent protective stickers on the sticker (not included)
  • Waterproof

Iron on labels

  • Set the iron to "wool" or medium heat, do not use steam.
  • Peel the label off the backing and place it on the desired spot with the visible writing facing upwards.
  • Place baking paper or an ironing cloth on the label to protect it.
  • Press the iron flat on the label for about 30 seconds and do not move it.
  • Allow the label to cool
  • Press the iron again for about 30 seconds flat on the label and do not move it.
  • First wash 24 hours after ironing at the earliest.
  • Permanent, waterproof and recommended for washings up to 40 degrees Celsius.

Shoe sticker

  • Surface must be smooth, clean and free of grease
  • Stick the sticker on the inside of the heel area of the shoe.
  • Smooth out to eliminate air bubbles
  • To avoid heavy abrasion, place one of the transparent protective stickers on the sticker.
  • After application, wait at least 24 hours before wearing the shoe.
  • Waterproof, recommended for washings up to 40 degrees Celsius

Reflective stickers

  • Surface may be flat to wavy and must be clean and degreased
  • Remove the label from the backing material and stick it to the surface, such as helmet, bike or rucksack, water bottle, etc.
  • Smooth out to remove air bubbles
  • First use/rinse at max. 60° at the earliest 24-48 hours after application

Note: Strongly adhesive and difficult to remove. Adhesive residues can be removed with 3M™ Scotchcal™ Adhesive Remover 231.